VIBE PEMF Therapy for Horses – Safe, Simple, and Effective

All Resona Health products are low-risk general wellness devices. We do NOT treat, diagnose, prevent, or cure any disease nor do we make ANY claims in this manner.

Any current medications, therapies, or treatments SHOULD NOT be discontinued during the use of any of our products. Consult with your doctor before you make any changes.

The following general contraindications taken from Dr Pawluk apply to Resona Products as well:

PEMF MACHINES RISK AND POTENTIAL DANGERS OF PEMF THERAPY
The only absolute contraindication for use of a PEMF device is placing an active applicator over implanted electrical devices like pacemakers, cochlear implants, intrathecal pumps, etc., because the magnetic field can shut the device off or otherwise interfere with its function.

PEMFs are contraindicated in organ transplant patients. This is because these people are on immune suppression medications to prevent organ rejection. We do not want to risk adversely affecting the immune suppression/rejection process. There is a chance that PEMFs may actually stimulate or activate a more aggressive rejection process by stimulating the immune system.

USING YOUR PEMF MACHINE SAFELY
Safety of PEMFs has not been established in pregnancy, although there is no evidence of harm. Most manufacturers warn against the use of their device during pregnancy.

PEMF Machines Risk does occur in Grave’s disease or in the case of active bleeding. Please exercise caution and your best judgment while using a PEMF device if impacted by one of these conditions.

Extremely high intensity PEMFs should be used with caution or with professional guidance in people with implanted metals, such as joint replacements, dental implants, mechanical heart valves, metal stents, or metal staples in blood vessels. This is not due to risk of injury or harm, but because extremely high intensity PEMFs may stimulate the nerves in the area of the metal, causing sharp pain. High intensity PEMFs may also add to the shear stress of metal clips placed in or near blood vessels.

The original frequencies came from a very simple list on an old machine that was discovered back in the early 1990s. Since then, 8000 practitioners over 35 years have experimented with those frequencies in a clinical environment.

It uses frequency pairs and those frequency pairs you can think of as ingredients and the protocols as recipes. So, where the protocols come from was trial and error from all those different doctors, chiropractors, physical therapists, etc. just experimenting with real patients trying to find the right combinations of frequencies that gave the best results.

Those are the protocols that Resona Health uses in all its products.

The majority of the VIBE protocols use a series of frequency pairs. If you think of the frequency pairs as cords on a guitar, then the protocols would be a song that has 20 to 50 different chords and each protocol is completely different.

So the vibe does not use in most cases a simple frequency or frequency sweep. It uses proprietary copyrighted protocols that range from 30 minutes to 2 1/2 hours. All of the frequencies are super low energy between 1 and 1000 Hertz.

The average length of a protocol is about 40 minutes with the shortest being 30 minutes and the longest a little over 2 1/2 hours. Each protocol is completely different. 

When you’re running the protocol, you must complete the entire protocol to get the maximum effect because it’s not operating on a single frequency. You must go through the entire protocol or recipe to get the benefit. You can pause the protocol at anytime and restart it later, but you must complete the entire protocol.

For example, sleep is 46 minutes long. If you only run it for 10 minutes it’s not really going to help you. You need to run it an hour before bedtime as a specific example.

So the vibe does not use in most cases a simple frequency or frequency sweep. It uses proprietary copyrighted protocols that range from 30 minutes to 2 1/2 hours. All of the frequencies are super low energy between 1 and 1000 Hertz.

No. The Vibe PEMF device is not programmable and you cannot select a specific frequency. It was designed to be ridiculously simple to use where you just simply select the protocol, hit play, and put it in your pocket. 

So we intentionally did not allow it to be programmed to reduce the complexity.

​#1 – ​It’s resonating with the water in your body like a pebble in a pond​. ​So the energy enters the body where the device is located​, but it travels just like a wave on water​. Again think of it like a pebble in a pond​. One reason we believe this is happening is it doesn’t work as well if you are not hydrated – which is a good clue.

​#2 – The other is that an alternating magnetic field will create an electrical current​, albeit at a very small one​. ​That electrical current is traveling through the body because the body’s electrically conductive​. 

​So it’s those two principles ​that allow ​the energy to travel further than just the magnetic field ​itself.

All of the wave forms on the Vibe PEMF device are Ramped Square Waves.

There are a number of ways to know if the VIBE is working.

Number one is the frequency bars on the screen show that the protocol is running. Please note that the screen will go into sleep mode after 15 seconds to save battery power but the protocol is still running.

A second way you know it’s working is the device will get warm up to 105°F so you will feel it. 

You can also test it with the Magnetic Field Tester

Simple hold the bottom of the tester over the coils and you will see the magnet jump around and make noise.

The coils are at the bottom on the back behind the wavy holes.

There are lots of PEMF devices out there. Most people who have heard of the technology will be familiar with a mat and there are several brands out there. One of them that’s the most common is the Bemer mat.

Forget the Mat. The VIBE is 25 times less expensive, 125 times smaller, 8 times stronger, and one piece not 7. The World’s only pocket PEMF therapy device.

PEMF mats were an awesome invention in their day. They have provided relief for millions of people around the world. But time moves on and so does technology.

PEMF mat technology is over 35 years old, and the modern replacement is called VIBE. It is a single stand-alone device that is ridiculously easy to use. You select one of the 59 protocols, click play, and put it in your pocket or wear it around your neck with lanyard. Or place it anywhere against your body.

It’s “therapy on-the-go” from Resona Health. 

Faster, Better, Cheaper.

This is our best summary of what we think we know.

https://resona.health/2023/10/01/liar-liar-pants-on-fire-where-is-the-data/ 

The Gauss level of the Vibe PEMF device is a maximum of nine Gauss. Here is a summary of the technical details.

Technical Details

• Maximum Magnetic field: 900 uT or 9 Gauss
• Dimensions: 120 × 59 × 12 mm
• Weight: 75 g (2.6 oz.)
• Battery: built-in rechargeable battery with 4 hours working time at maximum power and 8 hours at 50% power

No the VIBE cannot treat or cure cancer. The VIBE operates at an extremely low energy range, 1 to 1000 Hertz and you need much higher energy to kill a cancer cell. We recommend a Rife machine specifically Spooky 2 is one of the most affordable and most popular ones out there.

However, if you or a loved one has experienced cancer, the VIBE can provide all kinds of relief for post-radiation inflammation and pain, depression, anxiety, sleep, and many other “side effects” that come from the evil of cancer.

No it cannot help with parasites, similar to why it can not help with cancer. The energy is not high enough to kill parasites, however the immune support protocol may help to fight it off.

The number one reason the Vibe PEMF device won’t work for you is that you don’t use it.

You need to use it a minimum of three to four times a week or more. 

The second reason is you need to be hydrated. It still works if you’re not hydrated but not nearly as well. By hydrating, we mean consuming four 8-ounce glasses of water in the preceding 4 hours before treatment. It’s really not a lot of water and you should be drinking that much every day for general health anyway.

Another reason is it may not work is if you inadvertently turn the power level too low. The power level ranges from 1 to 10 and most people, 95% or so, will run it at the full power 10 unless your energy sensitive. 

We’ve had a few customers where it didn’t work for them and after investigation found out they turned it down to zero or one or something very low.

So, make sure the power level is at 10 for most people.

One last common mistake is that you’re using the wrong protocol for your ailment. Which in most cases means you’re self-diagnosing because you’re the one that selects the protocol. 

But sometimes what you selected is not really the core problem.

In circumstances like this, we highly recommend that you contact us so we can discuss your situation one-on-one, and make some recommendations on other things to try.

If you get it wet, it is not waterproof. The wavy holes on the back of the device are air vents for the coils. So if water gets inside of it – rice will not do the trick.

Use a blow dryer as quickly as possible to completely dry it then the device should be fine. Just don’t let it stay wet for very long or the circuitry will corrode. 

Yes, it’s OK to run several protocols in a day. But pay attention to your body and what it’s telling you. You can overdo it and it can make you tired because of it.

Because your body needs time to process the energy and repair itself. So just be keen to whether it’s making you too sluggish or tired and then cut back on the number of protocols or number of sessions in a day.

In general, we don’t recommend doing more than one or two sessions a day but everyone is different and we have customers doing it 7 to 8 times a day or more.

https://resona.health/2023/04/12/why-do-i-feel-tired-after-pemf-therapy/

No it does not need to touch your skin to be effective. It can be on the outside of your clothes. The only precaution is really thick jackets or thick clothing material because the magnetic field does drop off quickly with distance.

So, you want to get it as close to your body as you can specifically the back of the device as close as possible to your body.

Yes for over 95% of people, the power level should be at 10. Always start at ten unless you are energy-sensitive and it really bothers you for some reason. Then step down to power levels 8, 7 or 6 and see if you have a better experience.

Yes metal implants of all kinds are OK. Hip replacements, knee replacements, dental work. All of those are fine. The only contraindication is pacemakers and insulin pumps or any machinery that has electronics in it.

No the entire PEMF community does not recommend using it with a pacemaker because it could interfere with the electronics.

There is no age restriction for using the Vibe PEMF device. Kids of all ages can use it as well as the elderly.

No, for the most part the Vibe PEMF device does not make any noise, it has no speaker. And it’s not intended to be any kind of audio therapy. It is PEMF magnetic field so there is no audible piece to it. 

However, if it’s extremely quiet in the room and you put the coils against your ear, you may hear a very slight buzzing sound, but only if you have excellent hearing.

Yes we have a 30 day money back guarantee. We want you to have ample time to evaluate the device.

There is a one-year warranty on the Vibe PEMF device for most defects, however, common sense prevails here. If you’re very rough or abusive with it and damage it that is not covered under warranty.

Yes when a protocol is running the vibe should get warm up to 105°F which is perfectly normal. 105 Fahrenheit is what reasonably hot water would feel like on the inside of your wrist.

https://resona.health/2023/04/27/my-vibe-gets-warm-is-that-normal/

The magnetic field drops off very quickly, so the energy doesn’t transfer across a room or anything like that.

However, when it’s close to your body it’s resonating with the water in your body and the electrical conductivity of your body. Think of it like a pebble in a pond. 

The energy is delivered where the device is at, but that pebble makes a wave that travels through the water in your body. That’s how it can be in your pocket and the energy still reaches your foot.

Plus the alternating magnetic wave makes an electrical current, a very slight one albeit, and the energy can travel throughout the entire body due to the electrical conductivity of skin, organs, etc.

No one in the PEMF community recommends using it if you’re pregnant.

There are no known issues or cases where it’s caused a problem, but everyone has agreed to err on the side of safety here and simply recommends not using it if you’re pregnant.

You bought the VIBE for a reason. You were seeking relief from one or more ailments.

If you don’t get the relief you’re looking for, please contact Resona Health first to see if they can offer a solution. 90% of the time they can get you from “it just didn’t work for me” to “this device changed my life.”  So please give them another chance to help you.

If they can’t make you happy, contact us and we'll provide you with the return address.

This is our best summary of what we think we know.

https://resona.health/2023/10/01/liar-liar-pants-on-fire-where-is-the-data/

https://resona.health/2023/11/08/what-if-i-have-multiple-ailments/ 

Yes Resona Health has lots and lots of them here https://resona.health/testimonial/  and also many horse specific ones below.

Yes

https://resona.health/2023/06/30/take-meditation-to-the-next-level-with-vibe/ 

https://resona.health/2023/06/25/the-science-behind-pemf-therapy-how-it-recharges-your-cell-voltage/

No it is not. EMF can be harmful but PEMF is helpful. If low frequency PEMF was hazardous, every living thing on the planet Earth would be dead.

The Earth emits PEMF in multiple frequencies 24/7 and has since beginning of time.

https://resona.health/2023/03/30/pemf-vs-emf/ 

1. Frequency Range Mismatch: PEMF devices often operate at specific frequencies that may fall outside the range of detection for typical EMF meters. Standard EMF meters are designed to measure a broad spectrum of electromagnetic frequencies, and they may not be sensitive to the narrow and specific frequency ranges used in PEMF therapy.
2. Pulse Characteristics: PEMF devices emit pulsed electromagnetic fields with distinct pulse characteristics, including frequency, amplitude, and waveform. Many standard EMF meters are not designed to capture these pulse patterns accurately. As a result, they may provide inaccurate or misleading readings when exposed to PEMF signals.
3. Time-Averaging: Some EMF meters use time-averaging techniques to provide an overall measurement of electromagnetic exposure. However, PEMF therapy involves specific pulsing patterns over shorter durations, and these variations may not be accurately captured by meters that use longer time-averaging intervals.
4. Sensitivity and Resolution: PEMF devices may emit relatively weak electromagnetic fields, and standard EMF meters may not have the required sensitivity or resolution to measure these lower-intensity fields accurately.
5. Waveform Complexity: PEMF devices often produce complex waveform patterns, and standard EMF meters may not be equipped to analyze or interpret these complex waveforms correctly. The inability to capture the full complexity of the PEMF signal can result in inaccurate readings.
6. Directionality and Spatial Variability: The orientation and distance of the EMF meter concerning the PEMF source can affect readings. Standard EMF meters may not account for the spatial variability and directionality inherent in many PEMF devices, leading to inconsistent measurements.
7. Device Calibration: PEMF devices, particularly medical-grade ones, may be subject to strict calibration standards for therapeutic efficacy and safety. Standard EMF meters may not adhere to the same calibration standards, making their readings less reliable in the context of PEMF therapy.
8. Lack of Specific Standards: There are no widely recognized standards for measuring PEMF with consumer-grade EMF meters. The absence of standardized testing protocols for PEMF can make it challenging to assess the accuracy and reliability of readings obtained from general-purpose EMF meters.

Yes. Are you looking for a natural and effective way to balance your hormones? Look no further than the Solfeggio frequency 528 Hz, also known as the Love Frequency. This powerful frequency has been shown to have numerous benefits for our physical and emotional wellbeing, especially when it comes to hormonal balance. In this article, we’ll explore what the Solfeggio frequency is, how it can benefit your hormones, and how you can start using it in your daily life. Get ready to discover a whole new world of healing through the power of 528!

https://resona.health/2023/06/05/solfeggio-frequency-528-hz-for-hormones/ 

There are no other charges or subscription fees.  

The VIBE is a complete stand-alone “ready to go” therapy device.

No apps or software to download.

Yes! Here are the top six ailments it can help with:

PTSD/Trauma
PTSD and Trauma is a condition that occurs in dogs and cats after they experience a traumatic event, such as abuse or a natural disaster. Symptoms of PTSD in dogs and cats may include hypervigilance, anxiety, aggression, and avoidance behavior.

Separation Anxiety
Separation anxiety is a condition that occurs in dogs and cats when they become distressed or anxious when left alone. Symptoms of separation anxiety may include excessive barking or meowing, destructive behavior, and toileting inside the house and outside litter boxes.

Allergies
Allergies can be caused by a variety of things, including food, pollen, and dust. Symptoms of allergies in dogs and cats may include itching, redness, and inflammation of the skin, as well as gastrointestinal upset.

Arthritis
Arthritis is a condition that occurs when there is inflammation in the joints. Symptoms of arthritis may include limping, stiffness, and reluctance to move.

Inflammation
Inflammation in dogs and cats can occur for a variety of reasons, including infection, injury, and chronic disease. Symptoms of inflammation may include swelling, redness, and pain.

Relax and Balance
Relaxation and balance in dogs and cats is essential for their overall health and well-being. Relaxation techniques, such as massage and aromatherapy, can help dogs to relax and reduce stress. Balanced nutrition, exercise, and socialization can help dogs to maintain physical and emotional balance.

Bonus – Wound Healing
PEMF, or Pulsed Electromagnetic Field therapy, has gained significant attention in recent years for its potential to aid in wound healing in dogs. This innovative technology utilizes electromagnetic fields to stimulate cellular repair and regeneration processes within the body. When a dog sustains an injury or undergoes surgery, PEMF can be employed as a non-invasive treatment method to promote faster and more efficient wound healing. The key strength of PEMF lies in its ability to enhance blood circulation by causing vasodilation, thereby delivering increased oxygen and nutrients to the affected area. By doing so, it supports tissue regeneration while simultaneously reducing inflammation and pain associated with wounds. Additionally, PEMF stimulates fibroblast activity, which is crucial in building new connective tissue necessary for proper healing. This therapy also aids in controlling infection by strengthening the immune system response at the site of injury. Overall, PEMF presents itself as a promising avenue for veterinarians seeking effective wound healing solutions that help improve their furry patients’ quality of life without resorting solely to medication or invasive procedures like surgeries.

PEMF (Pulsed Electromagnetic Field) therapy is a non-invasive treatment that uses low-frequency electromagnetic waves to stimulate and heal cells in the body. It is known to be effective in reducing pain, inflammation, and improving blood circulation.

However, it is not uncommon to feel tired after PEMF therapy. There are several reasons why this may happen:

The body is undergoing healing: PEMF therapy stimulates the body’s natural healing processes, which can be physically demanding. As a result, your body may feel tired as it works to repair and regenerate damaged cells.

Increased relaxation: PEMF therapy can also induce a deep state of relaxation, which can leave you feeling calm and sleepy.

Dehydration: PEMF therapy may also cause dehydration, which can lead to fatigue. It is important to stay hydrated before and after treatment.

Detoxification: PEMF therapy may also facilitate the release of toxins from the body. As these toxins are eliminated, you may experience fatigue as your body works to process and eliminate them.

Overall, feeling tired after PEMF therapy is not necessarily a cause for concern. However, if you experience persistent or severe fatigue, it is important to consult with your healthcare provider to rule out any underlying health issues.